APRS Track Direct

My position About ☰

reset

TA4ALA-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4ALA-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1790640474	2 Pkt	0 Pkt	-59 dBm	13.56 V
1790639549	2 Pkt	0 Pkt	-61 dBm	13.78 V
1790638624	2 Pkt	0 Pkt	-62 dBm	13.6 V
1790637697	2 Pkt	0 Pkt	-62 dBm	13.54 V
1790636772	3 Pkt	0 Pkt	-61 dBm	13.8 V
1790635846	3 Pkt	0 Pkt	-61 dBm	13.68 V
1790634921	2 Pkt	0 Pkt	-62 dBm	13.86 V
1790633996	1 Pkt	0 Pkt	-62 dBm	13.58 V
1790633072	1 Pkt	1 Pkt	-61 dBm	13.47 V
1790632144	1 Pkt	3 Pkt	-60 dBm	13.82 V
1790631217	3 Pkt	3 Pkt	-61 dBm	13.58 V
1790630288	2 Pkt	3 Pkt	-61 dBm	13.66 V
1790629359	2 Pkt	3 Pkt	-60 dBm	13.84 V
1790628430	0 Pkt	3 Pkt	-60 dBm	13.86 V
1790627502	1 Pkt	3 Pkt	-60 dBm	13.8 V
1790626573	1 Pkt	3 Pkt	-61 dBm	13.82 V
1790625643	1 Pkt	3 Pkt	-62 dBm	13.8 V
1790624713	2 Pkt	3 Pkt	-61 dBm	13.8 V
1790623784	1 Pkt	4 Pkt	-61 dBm	13.7 V
1790622854	2 Pkt	3 Pkt	-61 dBm	13.37 V
1790621926	2 Pkt	0 Pkt	-63 dBm	13.41 V
1790621000	4 Pkt	0 Pkt	-61 dBm	13.56 V
1790620088	0 Pkt	0 Pkt	-59 dBm	13.64 V
1790619149	3 Pkt	0 Pkt	-61 dBm	13.54 V
1790618224	1 Pkt	0 Pkt	-62 dBm	13.54 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)