This is the latest recevied telemetry packets stored in our database for station/object DC4HF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732546303 | 243 | 6528 | 7590 | 4851 | 1652 |
| 1732545375 | 243 | 0 | 7195 | 4043 | 3258 |
| 1732544265 | 243 | 0 | 7143 | 3916 | 3595 |
| 1732543355 | 243 | 0 | 7139 | 3930 | 3605 |
| 1732542443 | 243 | 0 | 7149 | 3924 | 3617 |
| 1732541535 | 243 | 0 | 7149 | 3939 | 3620 |
| 1732540625 | 243 | 0 | 7154 | 3961 | 3602 |
| 1732539715 | 243 | 0 | 7156 | 3954 | 3619 |
| 1732538805 | 243 | 0 | 7157 | 3965 | 3590 |
| 1732537895 | 243 | 0 | 7160 | 3981 | 3526 |
| 1732536985 | 243 | 0 | 7160 | 4000 | 3482 |
| 1732536075 | 243 | 0 | 7161 | 4014 | 3489 |
| 1732535169 | 243 | 0 | 7167 | 4019 | 3486 |
| 1732534265 | 243 | 0 | 7168 | 4059 | 3505 |
| 1732533355 | 243 | 0 | 7166 | 4053 | 3518 |
| 1732532445 | 243 | 0 | 7169 | 4061 | 3503 |
| 1732531536 | 243 | 0 | 7171 | 4077 | 3506 |
| 1732530632 | 243 | 0 | 7172 | 4112 | 3475 |
| 1732529725 | 243 | 0 | 7174 | 4047 | 3627 |
| 1732528815 | 243 | 0 | 7178 | 4074 | 3468 |
| 1732527903 | 243 | 0 | 7177 | 3952 | 3759 |
| 1732526995 | 243 | 0 | 7176 | 3940 | 3745 |
| 1732526085 | 243 | 0 | 7177 | 3903 | 3813 |
| 1732525175 | 243 | 0 | 7178 | 3883 | 3815 |
| 1732524271 | 243 | 0 | 7180 | 3880 | 3812 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)