This is the latest recevied telemetry packets stored in our database for station/object DG0JDE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290926 | 3.9 deg C | 69.3 % | 1007.3 hPa | 0 | 0 |
| 1732290026 | 3.6 deg C | 69.8 % | 1007.1 hPa | 0 | 0 |
| 1732289126 | 3.8 deg C | 69.4 % | 1006.7 hPa | 0 | 0 |
| 1732288226 | 3.8 deg C | 69.3 % | 1006.6 hPa | 0 | 0 |
| 1732287326 | 4.6 deg C | 67.4 % | 1006.2 hPa | 0 | 0 |
| 1732286426 | 4.6 deg C | 67.5 % | 1006.2 hPa | 0 | 0 |
| 1732285526 | 4.7 deg C | 67.4 % | 1005.9 hPa | 0 | 0 |
| 1732284626 | 4.5 deg C | 68 % | 1005.9 hPa | 0 | 0 |
| 1732283725 | 4.6 deg C | 67.3 % | 1005.6 hPa | 0 | 0 |
| 1732282825 | 4.7 deg C | 66.6 % | 1005.5 hPa | 0 | 0 |
| 1732281925 | 4.5 deg C | 67.4 % | 1005.3 hPa | 0 | 0 |
| 1732281025 | 4.1 deg C | 67.6 % | 1005.2 hPa | 0 | 0 |
| 1732280125 | 4.3 deg C | 67 % | 1005 hPa | 0 | 0 |
| 1732279225 | 4.7 deg C | 66.1 % | 1004.8 hPa | 0 | 0 |
| 1732278325 | 4.8 deg C | 65.1 % | 1004.8 hPa | 0 | 0 |
| 1732277425 | 4.9 deg C | 65.8 % | 1004.7 hPa | 0 | 0 |
| 1732276525 | 5 deg C | 65.8 % | 1004.5 hPa | 0 | 0 |
| 1732275625 | 5.3 deg C | 67.5 % | 1004.3 hPa | 0 | 0 |
| 1732274725 | 4.9 deg C | 71.4 % | 1004.5 hPa | 0 | 0 |
| 1732273825 | 3.9 deg C | 74.8 % | 1004.6 hPa | 0 | 0 |
| 1732272925 | 4.3 deg C | 70.6 % | 1004.5 hPa | 0 | 0 |
| 1732272025 | 4.3 deg C | 70.2 % | 1004.4 hPa | 0 | 0 |
| 1732271125 | 4.5 deg C | 68.5 % | 1004.4 hPa | 0 | 0 |
| 1732270224 | 4.7 deg C | 68.3 % | 1004.1 hPa | 0 | 0 |
| 1732269324 | 4.8 deg C | 66.2 % | 1004 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)