This is the latest recevied telemetry packets stored in our database for station/object IK2EXH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794916642 | 2 Pkt/10m | 0 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1794913101 | 8 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794909560 | 8 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794906019 | 2 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794902478 | 2 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794898938 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794895397 | 1 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794891857 | 6 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794888317 | 7 Pkt/10m | 0 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1794884776 | 5 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794881236 | 10 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794877695 | 3 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794874155 | 10 Pkt/10m | 0 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1794870614 | 1 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794867074 | 1 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794863534 | 4 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794859993 | 7 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794856453 | 5 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794852912 | 6 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794849372 | 6 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794845832 | 8 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794842291 | 12 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0 | 0 |
| 1794838751 | 7 Pkt/10m | 0 Pkt/10m | 4.84 Volt | 0 | 0 |
| 1794835210 | 0 Pkt/10m | 0 Pkt/10m | 4.84 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)