This is the latest recevied telemetry packets stored in our database for station/object YG9EFQ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791993661 | 29 | 0 | 0 | 0 | 0 |
| 1791992761 | 29 | 0 | 0 | 0 | 0 |
| 1791991861 | 29 | 0 | 0 | 0 | 0 |
| 1791990961 | 28 | 0 | 0 | 0 | 0 |
| 1791990061 | 29 | 0 | 0 | 0 | 0 |
| 1791989161 | 29 | 0 | 0 | 0 | 0 |
| 1791988261 | 30 | 0 | 0 | 0 | 0 |
| 1791987361 | 29 | 0 | 0 | 0 | 0 |
| 1791986461 | 31 | 0 | 0 | 0 | 0 |
| 1791985561 | 32 | 0 | 0 | 0 | 0 |
| 1791984661 | 31 | 0 | 0 | 0 | 0 |
| 1791983760 | 31 | 0 | 0 | 0 | 0 |
| 1791982860 | 30 | 0 | 0 | 0 | 0 |
| 1791981960 | 31 | 0 | 0 | 0 | 0 |
| 1791981060 | 30 | 0 | 0 | 0 | 0 |
| 1791980160 | 30 | 0 | 0 | 0 | 0 |
| 1791979260 | 28 | 0 | 0 | 0 | 0 |
| 1791978360 | 30 | 0 | 0 | 0 | 0 |
| 1791977460 | 30 | 0 | 0 | 0 | 0 |
| 1791976560 | 30 | 0 | 0 | 0 | 0 |
| 1791975660 | 29 | 0 | 0 | 0 | 0 |
| 1791974760 | 28 | 0 | 0 | 0 | 0 |
| 1791973860 | 28 | 0 | 0 | 0 | 0 |
| 1791972960 | 28 | 0 | 0 | 0 | 0 |
| 1791972059 | 27 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)