APRS Track Direct

My position About ☰

reset

SEKANS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SEKANS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732272612	0.1 Rx Erlang	0.04 Tx Erlang	92 count/10m	0 count/10m	31 count/10m
1732271412	0.09 Rx Erlang	0.03 Tx Erlang	86 count/10m	0 count/10m	29 count/10m
1732270212	0.08 Rx Erlang	0.04 Tx Erlang	81 count/10m	0 count/10m	36 count/10m
1732269012	0.11 Rx Erlang	0.04 Tx Erlang	104 count/10m	0 count/10m	36 count/10m
1732267812	0.11 Rx Erlang	0.04 Tx Erlang	107 count/10m	0 count/10m	34 count/10m
1732266612	0.11 Rx Erlang	0.04 Tx Erlang	104 count/10m	0 count/10m	35 count/10m
1732265412	0.1 Rx Erlang	0.04 Tx Erlang	89 count/10m	0 count/10m	32 count/10m
1732264212	0.08 Rx Erlang	0.04 Tx Erlang	77 count/10m	0 count/10m	29 count/10m
1732263012	0.08 Rx Erlang	0.04 Tx Erlang	83 count/10m	0 count/10m	34 count/10m
1732261812	0.11 Rx Erlang	0.04 Tx Erlang	92 count/10m	0 count/10m	37 count/10m
1732260612	0.08 Rx Erlang	0.03 Tx Erlang	75 count/10m	0 count/10m	32 count/10m
1732259412	0.09 Rx Erlang	0.04 Tx Erlang	91 count/10m	0 count/10m	33 count/10m
1732258212	0.1 Rx Erlang	0.05 Tx Erlang	84 count/10m	0 count/10m	40 count/10m
1732257012	0.06 Rx Erlang	0.03 Tx Erlang	56 count/10m	1 count/10m	23 count/10m
1732255812	0.06 Rx Erlang	0.03 Tx Erlang	50 count/10m	0 count/10m	23 count/10m
1732254612	0.06 Rx Erlang	0.03 Tx Erlang	61 count/10m	0 count/10m	29 count/10m
1732253412	0.07 Rx Erlang	0.04 Tx Erlang	67 count/10m	0 count/10m	32 count/10m
1732252212	0.07 Rx Erlang	0.04 Tx Erlang	63 count/10m	0 count/10m	31 count/10m
1732251012	0.09 Rx Erlang	0.05 Tx Erlang	89 count/10m	0 count/10m	41 count/10m
1732249812	0.08 Rx Erlang	0.04 Tx Erlang	76 count/10m	0 count/10m	34 count/10m
1732248612	0.06 Rx Erlang	0.04 Tx Erlang	54 count/10m	1 count/10m	31 count/10m
1732247412	0.08 Rx Erlang	0.04 Tx Erlang	74 count/10m	1 count/10m	39 count/10m
1732246212	0.07 Rx Erlang	0.04 Tx Erlang	56 count/10m	1 count/10m	31 count/10m
1732245012	0.05 Rx Erlang	0.03 Tx Erlang	47 count/10m	0 count/10m	26 count/10m
1732243812	0.08 Rx Erlang	0.04 Tx Erlang	76 count/10m	2 count/10m	36 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)