This is the latest recevied telemetry packets stored in our database for station/object SP9SOY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPH* | UV-A* | UV-B* | UV-C* | IR* |
---|---|---|---|---|---|
1719846087 | 31 | 10 | 10 | 2 | 103 |
1719844259 | 26 | 9 | 10 | 2 | 83 |
1719842491 | 34 | 12 | 10 | 4 | 120 |
1719840663 | 38 | 14 | 10 | 4 | 139 |
1719838895 | 27 | 13 | 10 | 4 | 119 |
1719837063 | 30 | 1 | 0 | 0 | 13 |
1719835296 | 36 | 21 | 40 | 10 | 218 |
1719833468 | 35 | 21 | 25 | 6 | 189 |
1719831700 | 35 | 8 | 10 | 2 | 98 |
1719829873 | 30 | 12 | 10 | 4 | 113 |
1719828101 | 32 | 12 | 10 | 4 | 113 |
1719826273 | 38 | 2 | 0 | 0 | 20 |
1719824506 | 24 | 5 | 0 | 2 | 49 |
1719822677 | 17 | 8 | 10 | 2 | 71 |
1719820909 | 28 | 7 | 10 | 2 | 70 |
1719819082 | 33 | 3 | 0 | 0 | 32 |
1719817251 | 30 | 4 | 0 | 2 | 54 |
1719815481 | 32 | 10 | 10 | 2 | 77 |
1719813652 | 29 | 3 | 0 | 0 | 36 |
*Used Equation Coefficients:
CPH: 0, 1, 0
UV-A: 0, 1, 0
UV-B: 0, 1, 0
UV-C: 0, 1, 0
IR: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)