This is the latest recevied telemetry packets stored in our database for station/object IU5IWS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1786717733 | 932.5 hPa | 68.5 C deg | 8.7 % | 1003.6 hPa | 0 C deg |
| 1786715877 | 932.6 hPa | 67.8 C deg | 9.7 % | 1003.9 hPa | 0 C deg |
| 1786712214 | 933.2 hPa | 80.8 C deg | 6.7 % | 1001.8 hPa | 0 C deg |
| 1786710375 | 933.5 hPa | 79.9 C deg | 7.1 % | 1002.2 hPa | 0 C deg |
| 1786708557 | 934.1 hPa | 76.2 C deg | 8.2 % | 1003.7 hPa | 0 C deg |
| 1786706721 | 934.5 hPa | 70.8 C deg | 9.9 % | 1005.3 hPa | 0 C deg |
| 1786704908 | 934.9 hPa | 64 C deg | 12 % | 1007.1 hPa | 0 C deg |
| 1786701226 | 935.2 hPa | 44.3 C deg | 17.8 % | 1012.1 hPa | 0 C deg |
| 1786693839 | 950.6 hPa | 29.2 C deg | 30.8 % | 1032.9 hPa | 0 C deg |
| 1786692844 | 935.8 hPa | 24.7 C deg | 42.7 % | 1018.2 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)