APRS Track Direct

My position About ☰

reset

SR8RJS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1753731966	14.38 Volt	40 Pkt	20 Pkt	66 Pcnt
1753731066	14.38 Volt	40 Pkt	20 Pkt	66 Pcnt
1753730166	14.38 Volt	50 Pkt	10 Pkt	66 Pcnt
1753729266	14.38 Volt	30 Pkt	20 Pkt	66 Pcnt
1753728366	14.38 Volt	40 Pkt	20 Pkt	67 Pcnt
1753725666	14.38 Volt	30 Pkt	30 Pkt	66 Pcnt
1753724766	14.38 Volt	50 Pkt	30 Pkt	67 Pcnt
1753723866	14.38 Volt	50 Pkt	20 Pkt	67 Pcnt
1753722966	14.38 Volt	90 Pkt	20 Pkt	66 Pcnt
1753722066	14.38 Volt	0 Pkt	0 Pkt	65 Pcnt
1753721166	14.38 Volt	10 Pkt	10 Pkt	65 Pcnt
1753720266	14.38 Volt	20 Pkt	10 Pkt	66 Pcnt
1753719366	14.38 Volt	10 Pkt	10 Pkt	67 Pcnt
1753718466	14.38 Volt	10 Pkt	10 Pkt	67 Pcnt
1753717566	14.38 Volt	40 Pkt	10 Pkt	67 Pcnt
1753716666	14.38 Volt	0 Pkt	10 Pkt	67 Pcnt
1753715767	14.38 Volt	0 Pkt	20 Pkt	68 Pcnt
1753714867	14.38 Volt	60 Pkt	20 Pkt	68 Pcnt
1753713967	14.38 Volt	30 Pkt	10 Pkt	69 Pcnt
1753713067	14.38 Volt	70 Pkt	20 Pkt	71 Pcnt
1753712167	14.38 Volt	0 Pkt	20 Pkt	72 Pcnt
1753711267	14.38 Volt	10 Pkt	30 Pkt	74 Pcnt
1753710367	14.38 Volt	60 Pkt	30 Pkt	74 Pcnt
1753709467	14.38 Volt	50 Pkt	30 Pkt	74 Pcnt
1753708567	14.38 Volt	30 Pkt	30 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)