APRS Track Direct

My position About ☰

reset

TA2KJ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2KJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786735230	63 Pkt	7 Pkt	0 Pkt	-68 dBm	0.08 V
1786733363	47 Pkt	6 Pkt	0 Pkt	-69 dBm	0.06 V
1786732431	49 Pkt	13 Pkt	0 Pkt	-71 dBm	0.06 V
1786730568	39 Pkt	4 Pkt	4 Pkt	-69 dBm	0.08 V
1786729638	57 Pkt	10 Pkt	2 Pkt	-69 dBm	0.08 V
1786724188	54 Pkt	11 Pkt	2 Pkt	-68 dBm	0.06 V
1786723250	65 Pkt	10 Pkt	1 Pkt	-69 dBm	0.08 V
1786722316	57 Pkt	8 Pkt	0 Pkt	-72 dBm	0.06 V
1786722316	57 Pkt	8 Pkt	0 Pkt	-71 dBm	0.06 V
1786721381	61 Pkt	1 Pkt	1 Pkt	-70 dBm	0.08 V
1786720450	51 Pkt	8 Pkt	4 Pkt	-68 dBm	0.06 V
1786719518	51 Pkt	18 Pkt	1 Pkt	-66 dBm	0.08 V
1786718572	46 Pkt	11 Pkt	0 Pkt	-67 dBm	0.06 V
1786717636	1 Pkt	0 Pkt	0 Pkt	-66 dBm	0.06 V
1786713510	63 Pkt	7 Pkt	0 Pkt	-65 dBm	0.08 V
1786710702	64 Pkt	2 Pkt	0 Pkt	-65 dBm	0.08 V
1786707907	58 Pkt	6 Pkt	1 Pkt	-70 dBm	0.08 V
1786705058	58 Pkt	20 Pkt	2 Pkt	-71 dBm	0.08 V
1786703182	65 Pkt	3 Pkt	0 Pkt	-66 dBm	0.08 V
1786702252	54 Pkt	8 Pkt	0 Pkt	-67 dBm	0.08 V
1786701319	62 Pkt	3 Pkt	1 Pkt	-67 dBm	0.08 V
1786699460	62 Pkt	3 Pkt	0 Pkt	-68 dBm	0.08 V
1786693860	54 Pkt	3 Pkt	0 Pkt	-67 dBm	0.08 V
1786691999	60 Pkt	5 Pkt	0 Pkt	-66 dBm	0.06 V
1786689198	60 Pkt	5 Pkt	1 Pkt	-68 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)