APRS Track Direct

My position About ☰

reset

9A4QV-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1732296709	12.15 Volt	1480 Pkt	80 Pcnt	18.48 C°
1732296640	12.15 Volt	1480 Pkt	80 Pcnt	18.48 C°
1732294840	12.15 Volt	1450 Pkt	80 Pcnt	18.48 C°
1732293040	12.15 Volt	1490 Pkt	78 Pcnt	18.48 C°
1732293007	12.38 Volt	1570 Pkt	76 Pcnt	18.48 C°
1732291240	12.23 Volt	1610 Pkt	77 Pcnt	18.48 C°
1732289440	12.38 Volt	1570 Pkt	76 Pcnt	18.48 C°
1732287640	12.83 Volt	1520 Pkt	76 Pcnt	18.48 C°
1732287433	12.23 Volt	1470 Pkt	74 Pcnt	18.48 C°
1732285840	12.23 Volt	1470 Pkt	74 Pcnt	18.48 C°
1732284040	12.23 Volt	1410 Pkt	74 Pcnt	18.48 C°
1732282304	12.15 Volt	1370 Pkt	76 Pcnt	18.48 C°
1732282240	12.15 Volt	1370 Pkt	76 Pcnt	18.48 C°
1732280440	12.15 Volt	1390 Pkt	75 Pcnt	18.48 C°
1732278640	12.23 Volt	1420 Pkt	75 Pcnt	18.48 C°
1732276840	12.23 Volt	1340 Pkt	72 Pcnt	18.48 C°
1732275881	12.23 Volt	1370 Pkt	70 Pcnt	18.48 C°
1732275040	12.23 Volt	1370 Pkt	70 Pcnt	18.48 C°
1732273241	12.23 Volt	1480 Pkt	68 Pcnt	18.48 C°
1732271455	12.23 Volt	1520 Pkt	67 Pcnt	18.48 C°
1732271441	12.23 Volt	1520 Pkt	67 Pcnt	18.48 C°
1732269641	12.23 Volt	1520 Pkt	68 Pcnt	18.48 C°
1732267841	12.23 Volt	1470 Pkt	67 Pcnt	18.48 C°
1732266041	12.23 Volt	1370 Pkt	69 Pcnt	18.48 C°
1732264246	12.23 Volt	1390 Pkt	72 Pcnt	18.48 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)