This is the latest recevied telemetry packets stored in our database for station/object OE3TEC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1732284663 | 980.9 hPa | 15 C deg | 29.1 % | 1005.8 hPa | 0 C deg |
| 1732282859 | 980 hPa | 15.5 C deg | 28.5 % | 1004.9 hPa | 0 C deg |
| 1732281059 | 979.9 hPa | 15.4 C deg | 28.3 % | 1004.8 hPa | 0 C deg |
| 1732279258 | 979.8 hPa | 15.2 C deg | 27.8 % | 1004.7 hPa | 0 C deg |
| 1732277491 | 979.4 hPa | 15.2 C deg | 27.7 % | 1004.3 hPa | 0 C deg |
| 1732274983 | 979.1 hPa | 15.1 C deg | 27.9 % | 1004 hPa | 0 C deg |
| 1732273185 | 978.9 hPa | 14.8 C deg | 28.2 % | 1003.8 hPa | 0 C deg |
| 1732271384 | 978.9 hPa | 14.6 C deg | 28.7 % | 1003.8 hPa | 0 C deg |
| 1732269591 | 978.6 hPa | 14.1 C deg | 29.1 % | 1003.5 hPa | 0 C deg |
| 1732267781 | 978.5 hPa | 13.5 C deg | 29.7 % | 1003.5 hPa | 0 C deg |
| 1732265998 | 978 hPa | 13.1 C deg | 30.1 % | 1003.1 hPa | 0 C deg |
| 1732264183 | 977.5 hPa | 13.1 C deg | 30.6 % | 1002.5 hPa | 0 C deg |
| 1732262397 | 977.2 hPa | 13 C deg | 30.7 % | 1002.2 hPa | 0 C deg |
| 1732260606 | 976.7 hPa | 13 C deg | 30.6 % | 1001.7 hPa | 0 C deg |
| 1732256986 | 975.4 hPa | 13 C deg | 30.6 % | 1000.3 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)