APRS Track Direct

My position About ☰

reset

XE2KK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1750238151	0.9 Load	51 DegC	72 Mb	4861 Pkt	10547 Pkt
1750237250	0.58 Load	50.46 DegC	77 Mb	4685 Pkt	10491 Pkt
1750236351	0.83 Load	51 DegC	75 Mb	4573 Pkt	10459 Pkt
1750235451	0.5 Load	51.54 DegC	81 Mb	4647 Pkt	10702 Pkt
1750234550	0.62 Load	51.54 DegC	81 Mb	4807 Pkt	10665 Pkt
1750233651	0.65 Load	51.54 DegC	83 Mb	4689 Pkt	10379 Pkt
1750232751	0.66 Load	51.54 DegC	84 Mb	4584 Pkt	10373 Pkt
1750231850	0.64 Load	52.08 DegC	89 Mb	4947 Pkt	10761 Pkt
1750230950	0.62 Load	51.54 DegC	87 Mb	4864 Pkt	10558 Pkt
1750230050	0.74 Load	51.54 DegC	74 Mb	4772 Pkt	10596 Pkt
1750229151	1.02 Load	51.54 DegC	76 Mb	4496 Pkt	10584 Pkt
1750228250	0.62 Load	52.08 DegC	76 Mb	4898 Pkt	10721 Pkt
1750227350	0.63 Load	52.62 DegC	80 Mb	4819 Pkt	10666 Pkt
1750226451	0.68 Load	52.62 DegC	51 Mb	4872 Pkt	10781 Pkt
1750225550	0.66 Load	52.62 DegC	73 Mb	4806 Pkt	10667 Pkt
1750224650	0.72 Load	52.62 DegC	71 Mb	4637 Pkt	10705 Pkt
1750223751	0.68 Load	53.15 DegC	74 Mb	4695 Pkt	10560 Pkt
1750222850	0.69 Load	53.69 DegC	77 Mb	4662 Pkt	10571 Pkt
1750221951	0.64 Load	53.15 DegC	70 Mb	4729 Pkt	10690 Pkt
1750221051	0.49 Load	53.69 DegC	71 Mb	4677 Pkt	10751 Pkt
1750220151	0.75 Load	53.15 DegC	70 Mb	4753 Pkt	10607 Pkt
1750219250	0.62 Load	53.15 DegC	75 Mb	4897 Pkt	10377 Pkt
1750218351	0.85 Load	53.69 DegC	72 Mb	4498 Pkt	10251 Pkt
1750217451	0.7 Load	53.69 DegC	74 Mb	4460 Pkt	10274 Pkt
1750216550	0.57 Load	53.69 DegC	79 Mb	4627 Pkt	10175 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)