APRS Track Direct

My position About ☰

reset

VU2LCI-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU2LCI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1741883153	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741882433	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741881713	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741880993	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741880272	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741879552	0 Pkt	0 Pkt	0 Pkt	34 dB	0 bps
1741878832	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741878112	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741877392	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741876672	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741875952	0 Pkt	0 Pkt	0 Pkt	34 dB	0 bps
1741875232	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741874512	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741873792	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741873072	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741872352	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741871632	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741870912	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741870192	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741869472	0 Pkt	0 Pkt	0 Pkt	34 dB	0 bps
1741868752	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741868032	0 Pkt	0 Pkt	0 Pkt	36 dB	0 bps
1741867312	0 Pkt	0 Pkt	0 Pkt	34 dB	0 bps
1741866592	0 Pkt	0 Pkt	0 Pkt	35 dB	0 bps
1741865872	0 Pkt	0 Pkt	0 Pkt	31 dB	0 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)