This is the latest recevied telemetry packets stored in our database for station/object DA0WW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RHout* | Tout* | RHin* | Tin* | Fan* |
|---|---|---|---|---|---|
| 1790669934 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790668127 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790666316 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790664511 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790662697 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790657270 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790655460 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790653650 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790646413 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790644603 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790639176 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790637365 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790633747 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790631938 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790630128 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790626509 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790622890 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790621082 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790617465 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790615653 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790613845 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790602990 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790601177 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790593939 | 58 % | 28 C | 52 % | 25 C | 0 % |
| 1790588512 | 58 % | 28 C | 52 % | 25 C | 0 % |
*Used Equation Coefficients:
RHout: 0, 1, 0
Tout: 0, 1, -100
RHin: 0, 1, 0
Tin: 0, 1, -100
Fan: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)