APRS Track Direct

My position About ☰

reset

DB0HRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732286041	0.07 Rx Erlang	0 Tx Erlang	55 count/10m	6 count/10m	0 count/10m
1732284842	0.05 Rx Erlang	0 Tx Erlang	47 count/10m	5 count/10m	0 count/10m
1732283642	0.06 Rx Erlang	0 Tx Erlang	53 count/10m	8 count/10m	0 count/10m
1732282442	0.05 Rx Erlang	0 Tx Erlang	48 count/10m	1 count/10m	0 count/10m
1732281242	0.03 Rx Erlang	0 Tx Erlang	33 count/10m	3 count/10m	0 count/10m
1732280041	0.04 Rx Erlang	0 Tx Erlang	38 count/10m	8 count/10m	0 count/10m
1732278842	0.05 Rx Erlang	0 Tx Erlang	46 count/10m	5 count/10m	0 count/10m
1732277641	0.05 Rx Erlang	0 Tx Erlang	46 count/10m	5 count/10m	0 count/10m
1732276442	0.06 Rx Erlang	0 Tx Erlang	51 count/10m	4 count/10m	0 count/10m
1732275241	0.06 Rx Erlang	0 Tx Erlang	65 count/10m	7 count/10m	0 count/10m
1732274041	0.06 Rx Erlang	0 Tx Erlang	62 count/10m	7 count/10m	0 count/10m
1732272841	0.04 Rx Erlang	0 Tx Erlang	36 count/10m	2 count/10m	0 count/10m
1732271641	0.04 Rx Erlang	0 Tx Erlang	43 count/10m	6 count/10m	0 count/10m
1732270441	8.5 Rx Erlang	0 Tx Erlang	40 count/10m	5 count/10m	0 count/10m
1732269241	10.4 Rx Erlang	0 Tx Erlang	50 count/10m	7 count/10m	0 count/10m
1732268041	11.6 Rx Erlang	0 Tx Erlang	54 count/10m	6 count/10m	0 count/10m
1732266841	11.1 Rx Erlang	0 Tx Erlang	49 count/10m	6 count/10m	0 count/10m
1732265641	10.3 Rx Erlang	0 Tx Erlang	48 count/10m	10 count/10m	0 count/10m
1732264441	10.1 Rx Erlang	0 Tx Erlang	44 count/10m	6 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)