This is the latest recevied telemetry packets stored in our database for station/object DC5WT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750160457 | 29.1 deg C | 33.7 % | 1024.2 hPa | 0 | 0 |
| 1750159557 | 28.2 deg C | 34.3 % | 1024.6 hPa | 0 | 0 |
| 1750158657 | 28.8 deg C | 34.8 % | 1024.6 hPa | 0 | 0 |
| 1750158024 | 28.4 deg C | 34.7 % | 1024.7 hPa | 0 | 0 |
| 1750157124 | 28.8 deg C | 34.6 % | 1024.7 hPa | 0 | 0 |
| 1750156224 | 27.2 deg C | 38.1 % | 1025.1 hPa | 0 | 0 |
| 1750155323 | 26.8 deg C | 37.9 % | 1025.4 hPa | 0 | 0 |
| 1750154424 | 27.8 deg C | 36.1 % | 1025.2 hPa | 0 | 0 |
| 1750153523 | 28.8 deg C | 35.6 % | 1025.3 hPa | 0 | 0 |
| 1750152623 | 27.3 deg C | 38.6 % | 1025.6 hPa | 0 | 0 |
| 1750151723 | 28.3 deg C | 37.8 % | 1025.5 hPa | 0 | 0 |
| 1750150823 | 31.4 deg C | 34.7 % | 1025.1 hPa | 0 | 0 |
| 1750149923 | 29.9 deg C | 31.5 % | 1025.2 hPa | 0 | 0 |
| 1750149023 | 31.6 deg C | 34.2 % | 1025 hPa | 0 | 0 |
| 1750148123 | 29.8 deg C | 35.7 % | 1025.3 hPa | 0 | 0 |
| 1750147223 | 29.3 deg C | 38.2 % | 1025.4 hPa | 0 | 0 |
| 1750146323 | 28.9 deg C | 40.1 % | 1025.4 hPa | 0 | 0 |
| 1750145992 | 27.3 deg C | 42.8 % | 1025.6 hPa | 0 | 0 |
| 1750145092 | 26.3 deg C | 43.2 % | 1025.8 hPa | 0 | 0 |
| 1750144192 | 21.9 deg C | 54.9 % | 1026.5 hPa | 0 | 0 |
| 1750143292 | 21.5 deg C | 56.2 % | 1026.6 hPa | 0 | 0 |
| 1750142392 | 21.7 deg C | 57.2 % | 1026.6 hPa | 0 | 0 |
| 1750141492 | 21.5 deg C | 56.7 % | 1026.5 hPa | 0 | 0 |
| 1750140592 | 21.5 deg C | 60.7 % | 1026.5 hPa | 0 | 0 |
| 1750139692 | 19.2 deg C | 65.3 % | 1026.8 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)