This is the latest recevied telemetry packets stored in our database for station/object E20ZNR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1754183304 | 2 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 73 % |
| 1754182380 | 2 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 73 % |
| 1754181463 | 2 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 73 % |
| 1754180531 | 2 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 72 % |
| 1754179607 | 5 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 69 % |
| 1754178682 | 1 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 64 % |
| 1754177758 | 2 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 55 % |
| 1754176834 | 2 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 41 % |
| 1754175909 | 1 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 14 % |
| 1754174985 | 4 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 2 % |
| 1754174060 | 2 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1754173136 | 1 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1754172212 | 2 Pkt | 0 Pkt | 0 Pkt | -87 dBm | 0 % |
| 1754171287 | 2 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1754170363 | 4 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1754169439 | 2 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1754168514 | 2 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1754167590 | 1 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1754166666 | 5 Pkt | 1 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1754165741 | 1 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1754164817 | 1 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1754163892 | 1 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1754162968 | 2 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1754162044 | 3 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1754161120 | 1 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)