APRS Track Direct

My position About ☰

reset

VK4RBT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274676	14.14 Volt	290 Pkt	10 Pkt	85 Pcnt
1762347000	14.14 Volt	200 Pkt	10 Pkt	72 Pcnt
1762346099	14.14 Volt	190 Pkt	10 Pkt	72 Pcnt
1762345198	14.14 Volt	200 Pkt	10 Pkt	73 Pcnt
1762344297	14.14 Volt	200 Pkt	10 Pkt	73 Pcnt
1762343397	14.14 Volt	220 Pkt	10 Pkt	79 Pcnt
1762342496	14.14 Volt	250 Pkt	10 Pkt	82 Pcnt
1762341595	14.14 Volt	260 Pkt	10 Pkt	86 Pcnt
1762340694	14.14 Volt	250 Pkt	10 Pkt	86 Pcnt
1762339793	14.14 Volt	250 Pkt	10 Pkt	87 Pcnt
1762338892	14.14 Volt	210 Pkt	10 Pkt	86 Pcnt
1762337991	14.14 Volt	200 Pkt	10 Pkt	85 Pcnt
1762337090	14.14 Volt	210 Pkt	10 Pkt	88 Pcnt
1762336190	14.14 Volt	200 Pkt	10 Pkt	90 Pcnt
1762335289	14.14 Volt	210 Pkt	10 Pkt	88 Pcnt
1762334388	14.14 Volt	240 Pkt	10 Pkt	85 Pcnt
1762333487	14.14 Volt	240 Pkt	10 Pkt	83 Pcnt
1762332586	14.14 Volt	260 Pkt	10 Pkt	84 Pcnt
1762331685	14.14 Volt	260 Pkt	10 Pkt	83 Pcnt
1762330784	14.14 Volt	250 Pkt	10 Pkt	86 Pcnt
1762329884	14.14 Volt	280 Pkt	10 Pkt	86 Pcnt
1762328983	14.14 Volt	280 Pkt	10 Pkt	86 Pcnt
1762328082	14.14 Volt	300 Pkt	10 Pkt	84 Pcnt
1762327181	14.14 Volt	280 Pkt	10 Pkt	82 Pcnt
1762326280	14.14 Volt	270 Pkt	10 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)