This is the latest recevied telemetry packets stored in our database for station/object BH9FXK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Single* | RX* | Sta* | RPT* | Temp* |
|---|---|---|---|---|---|
| 1732293115 | 0 cnt | 0 cnt | 0 cnt | 0 cnt | 15 celsius |
| 1732291315 | 0 cnt | 0 cnt | 0 cnt | 0 cnt | 16.5 celsius |
| 1732289516 | 0 cnt | 3 cnt | 1 cnt | 41 cnt | 15.3 celsius |
| 1732287716 | 0 cnt | 3 cnt | 1 cnt | 41 cnt | 16.5 celsius |
| 1732285915 | 0 cnt | 3 cnt | 1 cnt | 40 cnt | 15.6 celsius |
| 1732284115 | 0 cnt | 3 cnt | 1 cnt | 40 cnt | 16.2 celsius |
| 1732282316 | 0 cnt | 3 cnt | 1 cnt | 39 cnt | 16.8 celsius |
| 1732280515 | 0 cnt | 3 cnt | 1 cnt | 39 cnt | 15 celsius |
| 1732278716 | 0 cnt | 3 cnt | 1 cnt | 38 cnt | 16.2 celsius |
| 1732276916 | 0 cnt | 3 cnt | 1 cnt | 38 cnt | 16.8 celsius |
| 1732275115 | 0 cnt | 3 cnt | 1 cnt | 37 cnt | 16.8 celsius |
| 1732273315 | 0 cnt | 3 cnt | 1 cnt | 37 cnt | 16.8 celsius |
| 1732271516 | 0 cnt | 3 cnt | 1 cnt | 36 cnt | 16.8 celsius |
| 1732269716 | 0 cnt | 3 cnt | 1 cnt | 36 cnt | 16.8 celsius |
| 1732267916 | 0 cnt | 3 cnt | 1 cnt | 34 cnt | 19 celsius |
| 1732266116 | 0 cnt | 3 cnt | 1 cnt | 34 cnt | 19.3 celsius |
| 1732264315 | 0 cnt | 3 cnt | 1 cnt | 32 cnt | 18.7 celsius |
| 1732262515 | 0 cnt | 3 cnt | 1 cnt | 32 cnt | 20 celsius |
| 1732260715 | 0 cnt | 3 cnt | 1 cnt | 30 cnt | 19.3 celsius |
| 1732258915 | 0 cnt | 3 cnt | 1 cnt | 30 cnt | 18.7 celsius |
| 1732257116 | 0 cnt | 3 cnt | 1 cnt | 29 cnt | 18.4 celsius |
| 1732255316 | 0 cnt | 3 cnt | 1 cnt | 29 cnt | 20.3 celsius |
| 1732253516 | 0 cnt | 2 cnt | 1 cnt | 28 cnt | 19.3 celsius |
| 1732251715 | 0 cnt | 2 cnt | 1 cnt | 27 cnt | 17.1 celsius |
| 1732249915 | 0 cnt | 2 cnt | 1 cnt | 25 cnt | 17.8 celsius |
*Used Equation Coefficients:
Single: 0, 1, 0
RX: 0, 1, 0
Sta: 0, 1, 0
RPT: 0, 1, 0
Temp: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)