APRS Track Direct

My position About ☰

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732373256	56 Pkt	26 Pkt	16 Pkt	-61 dBm	0.04 V
1732372526	62 Pkt	34 Pkt	27 Pkt	-61 dBm	0.04 V
1732371796	55 Pkt	32 Pkt	33 Pkt	-61 dBm	0.04 V
1732371066	66 Pkt	24 Pkt	21 Pkt	-63 dBm	0.02 V
1732370336	67 Pkt	8 Pkt	16 Pkt	-62 dBm	0.04 V
1732369606	77 Pkt	12 Pkt	21 Pkt	-63 dBm	0.04 V
1732368876	95 Pkt	13 Pkt	23 Pkt	-61 dBm	0.04 V
1732368146	94 Pkt	13 Pkt	23 Pkt	-62 dBm	0.04 V
1732367416	84 Pkt	9 Pkt	12 Pkt	-63 dBm	0.04 V
1732366686	88 Pkt	12 Pkt	18 Pkt	-63 dBm	0.04 V
1732365956	92 Pkt	14 Pkt	14 Pkt	-65 dBm	0.04 V
1732365226	91 Pkt	10 Pkt	12 Pkt	-66 dBm	0.04 V
1732364496	85 Pkt	11 Pkt	14 Pkt	-64 dBm	0.04 V
1732363766	75 Pkt	10 Pkt	8 Pkt	-62 dBm	0.04 V
1732363036	83 Pkt	10 Pkt	20 Pkt	-62 dBm	0.04 V
1732362306	66 Pkt	15 Pkt	14 Pkt	-63 dBm	0.04 V
1732361576	77 Pkt	10 Pkt	11 Pkt	-65 dBm	0.04 V
1732360846	83 Pkt	5 Pkt	12 Pkt	-62 dBm	0.04 V
1732360116	78 Pkt	7 Pkt	13 Pkt	-61 dBm	0.04 V
1732359386	78 Pkt	4 Pkt	11 Pkt	-62 dBm	0.04 V
1732358656	81 Pkt	6 Pkt	15 Pkt	-61 dBm	0.04 V
1732357926	74 Pkt	4 Pkt	17 Pkt	-61 dBm	0.04 V
1732357196	89 Pkt	5 Pkt	9 Pkt	-62 dBm	0.04 V
1732356466	96 Pkt	4 Pkt	11 Pkt	-62 dBm	0.04 V
1732355736	104 Pkt	2 Pkt	18 Pkt	-64 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)