This is the latest recevied telemetry packets stored in our database for station/object DC1MPP-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786786426 | 30.5 deg C | 36.8 % | 1013.3 hPa | 0 | 0 |
| 1786786062 | 30.2 deg C | 34.7 % | 1013.4 hPa | 0 | 0 |
| 1786785164 | 29.1 deg C | 38.1 % | 1013.7 hPa | 0 | 0 |
| 1786784264 | 27.7 deg C | 42 % | 1014 hPa | 0 | 0 |
| 1786783361 | 25.6 deg C | 45.6 % | 1014.5 hPa | 0 | 0 |
| 1786782459 | 23.3 deg C | 52.6 % | 1015 hPa | 0 | 0 |
| 1786781556 | 22.9 deg C | 52.6 % | 1015.2 hPa | 0 | 0 |
| 1786780658 | 22.5 deg C | 52.5 % | 1015.3 hPa | 0 | 0 |
| 1786779753 | 22.2 deg C | 52.8 % | 1015.4 hPa | 0 | 0 |
| 1786778850 | 21.9 deg C | 52.4 % | 1015.4 hPa | 0 | 0 |
| 1786777947 | 21.6 deg C | 52.3 % | 1015.6 hPa | 0 | 0 |
| 1786777045 | 21.5 deg C | 52.4 % | 1015.7 hPa | 0 | 0 |
| 1786776145 | 21.3 deg C | 52.7 % | 1015.7 hPa | 0 | 0 |
| 1786775248 | 21.2 deg C | 53.1 % | 1015.9 hPa | 0 | 0 |
| 1786774344 | 21.1 deg C | 53.5 % | 1015.9 hPa | 0 | 0 |
| 1786773443 | 21 deg C | 54.1 % | 1016 hPa | 0 | 0 |
| 1786771646 | 21.1 deg C | 54.5 % | 1015.9 hPa | 0 | 0 |
| 1786770741 | 21.2 deg C | 54.4 % | 1015.8 hPa | 0 | 0 |
| 1786769846 | 21.3 deg C | 54.4 % | 1016 hPa | 0 | 0 |
| 1786768943 | 21.5 deg C | 54.2 % | 1015.9 hPa | 0 | 0 |
| 1786768039 | 21.7 deg C | 53.9 % | 1015.9 hPa | 0 | 0 |
| 1786767134 | 21.8 deg C | 53.7 % | 1015.8 hPa | 0 | 0 |
| 1786766238 | 21.9 deg C | 53.6 % | 1015.7 hPa | 0 | 0 |
| 1786765339 | 22.1 deg C | 53.4 % | 1015.7 hPa | 0 | 0 |
| 1786764444 | 22.3 deg C | 53.3 % | 1015.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)