This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1786703439 | 30.79 C | 40.55 % | 981.5 | 4.18 V | 7 |
| 1786703432 | 30.79 C | 40.55 % | 981.5 | 4.19 V | 9 |
| 1786703428 | 30.78 C | 40.55 % | 981.5 | 4.19 V | 9 |
| 1786703424 | 30.78 C | 40.55 % | 981.5 | 4.19 V | 9 |
| 1786703400 | 30.73 C | 40.58 % | 981.5 | 4.18 V | 9 |
| 1786703391 | 30.71 C | 40.59 % | 981.5 | 4.18 V | 9 |
| 1786703380 | 30.7 C | 40.58 % | 981.6 | 4.18 V | 9 |
| 1786703371 | 30.68 C | 40.59 % | 981.6 | 4.18 V | 9 |
| 1786703368 | 30.67 C | 40.75 % | 981.6 | 4.18 V | 9 |
| 1786703364 | 30.67 C | 40.75 % | 981.6 | 4.18 V | 9 |
| 1786703352 | 30.64 C | 40.75 % | 981.6 | 4.18 V | 9 |
| 1786703337 | 30.61 C | 40.77 % | 981.6 | 4.18 V | 9 |
| 1786703326 | 30.59 C | 40.71 % | 981.6 | 4.18 V | 9 |
| 1786703317 | 30.56 C | 40.64 % | 981.6 | 4.18 V | 7 |
| 1786703309 | 30.56 C | 40.64 % | 981.6 | 4.18 V | 7 |
| 1786703303 | 30.54 C | 40.54 % | 981.6 | 4.18 V | 7 |
| 1786703300 | 30.54 C | 40.54 % | 981.6 | 4.18 V | 7 |
| 1786703275 | 30.48 C | 40.47 % | 981.6 | 4.18 V | 8 |
| 1786703266 | 30.46 C | 40.46 % | 981.6 | 4.18 V | 8 |
| 1786703257 | 30.45 C | 40.54 % | 981.6 | 4.18 V | 8 |
| 1786703249 | 30.45 C | 40.54 % | 981.6 | 4.18 V | 8 |
| 1786703242 | 30.43 C | 40.67 % | 981.6 | 4.18 V | 8 |
| 1786703242 | 30.43 C | 40.67 % | 981.6 | 4.18 V | 8 |
| 1786703207 | 30.35 C | 41.12 % | 981.6 | 4.18 V | 9 |
| 1786703192 | 30.32 C | 41.1 % | 981.6 | 4.18 V | 9 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)