APRS Track Direct

My position About ☰

reset

YH1RIX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH1RIX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732292588	32 Pkt	8 Pkt	-7 dBm	12.33 V
1732291652	2 Pkt	0 Pkt	-8 dBm	12.33 V
1732291047	29 Pkt	8 Pkt	-8 dBm	12.3 V
1732290110	33 Pkt	7 Pkt	-6 dBm	12.33 V
1732289177	26 Pkt	5 Pkt	-7 dBm	12.33 V
1732288243	25 Pkt	8 Pkt	-6 dBm	12.33 V
1732287308	28 Pkt	7 Pkt	-7 dBm	12.3 V
1732286374	33 Pkt	4 Pkt	-8 dBm	12.33 V
1732285444	36 Pkt	5 Pkt	-7 dBm	12.33 V
1732284514	30 Pkt	8 Pkt	-8 dBm	12.33 V
1732284513	30 Pkt	8 Pkt	-9 dBm	12.33 V
1732283578	29 Pkt	8 Pkt	-10 dBm	12.3 V
1732282643	32 Pkt	7 Pkt	-8 dBm	12.33 V
1732281708	41 Pkt	7 Pkt	-8 dBm	12.33 V
1732281707	41 Pkt	7 Pkt	-7 dBm	12.33 V
1732280772	35 Pkt	8 Pkt	-8 dBm	12.33 V
1732279836	37 Pkt	6 Pkt	-5 dBm	12.3 V
1732279835	37 Pkt	6 Pkt	-7 dBm	12.3 V
1732278901	38 Pkt	5 Pkt	-9 dBm	12.33 V
1732278901	38 Pkt	5 Pkt	-8 dBm	12.33 V
1732277969	30 Pkt	8 Pkt	-8 dBm	12.33 V
1732277969	30 Pkt	8 Pkt	-7 dBm	12.33 V
1732277033	38 Pkt	8 Pkt	-8 dBm	12.33 V
1732276097	38 Pkt	7 Pkt	-7 dBm	12.3 V
1732275162	39 Pkt	5 Pkt	-9 dBm	12.3 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)