APRS Track Direct

My position About ☰

reset

N5DRP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5DRP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1758219227	13.58 Volt	670 Pkt	150 Pkt	90 Pcnt	0 None
1758217426	13.8 Volt	610 Pkt	150 Pkt	89 Pcnt	0 None
1758215627	13.88 Volt	580 Pkt	130 Pkt	93 Pcnt	0 None
1758213827	13.8 Volt	750 Pkt	160 Pkt	94 Pcnt	0 None
1758213777	-	-	-	-	-
1758208427	13.8 Volt	990 Pkt	210 Pkt	87 Pcnt	0 None
1758206628	13.8 Volt	1240 Pkt	290 Pkt	84 Pcnt	0 None
1758204827	13.8 Volt	1410 Pkt	380 Pkt	79 Pcnt	0 None
1758203037	13.8 Volt	1470 Pkt	470 Pkt	81 Pcnt	0 None
1758201234	13.8 Volt	1320 Pkt	350 Pkt	85 Pcnt	0 None
1758199427	13.8 Volt	1080 Pkt	180 Pkt	88 Pcnt	0 None
1758199382	-	-	-	-	-
1758197627	13.8 Volt	950 Pkt	180 Pkt	90 Pcnt	0 None
1758195827	13.8 Volt	820 Pkt	150 Pkt	91 Pcnt	0 None
1758192228	13.8 Volt	650 Pkt	120 Pkt	88 Pcnt	0 None
1758190427	13.88 Volt	610 Pkt	110 Pkt	91 Pcnt	0 None
1758188628	13.8 Volt	580 Pkt	120 Pkt	91 Pcnt	0 None
1758186827	13.8 Volt	650 Pkt	140 Pkt	89 Pcnt	0 None
1758185027	13.8 Volt	780 Pkt	160 Pkt	90 Pcnt	0 None
1758184980	-	-	-	-	-
1758183461	13.8 Volt	720 Pkt	130 Pkt	91 Pcnt	0 None
1758183227	13.8 Volt	750 Pkt	150 Pkt	87 Pcnt	0 None
1758181427	13.8 Volt	710 Pkt	140 Pkt	83 Pcnt	0 None
1758179628	13.8 Volt	750 Pkt	150 Pkt	87 Pcnt	0 None
1758177828	13.8 Volt	720 Pkt	130 Pkt	91 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)