APRS Track Direct

My position About ☰

reset

DO2KTE-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO2KTE-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1744833674	979.9 hPa	32.1 C deg	27.4 %	1010.1 hPa	0 C deg
1744831874	980 hPa	32.5 C deg	27.3 %	1010.2 hPa	0 C deg
1744830074	980.2 hPa	32.4 C deg	27.4 %	1010.3 hPa	0 C deg
1744828274	980 hPa	31.3 C deg	28 %	1010.2 hPa	0 C deg
1744826474	979.8 hPa	31.1 C deg	28.2 %	1010.1 hPa	0 C deg
1744824674	979.9 hPa	31 C deg	28 %	1010.1 hPa	0 C deg
1744822874	979.7 hPa	31 C deg	27.5 %	1009.9 hPa	0 C deg
1744821074	979.8 hPa	30.8 C deg	27.5 %	1010 hPa	0 C deg
1744819274	979.8 hPa	30.6 C deg	27.5 %	1010.1 hPa	0 C deg
1744817474	979.8 hPa	30.2 C deg	27.8 %	1010.1 hPa	0 C deg
1744815673	979.8 hPa	30.4 C deg	27.7 %	1010.1 hPa	0 C deg
1744813873	980 hPa	30.2 C deg	27.7 %	1010.3 hPa	0 C deg
1744812073	980.3 hPa	29.9 C deg	27.8 %	1010.7 hPa	0 C deg
1744810273	980.5 hPa	29.9 C deg	27.8 %	1010.9 hPa	0 C deg
1744808473	980.7 hPa	29.7 C deg	27.9 %	1011.1 hPa	0 C deg
1744806673	981.1 hPa	29.6 C deg	27.9 %	1011.5 hPa	0 C deg
1744804873	981.4 hPa	28.9 C deg	28.2 %	1011.9 hPa	0 C deg
1744803073	981.5 hPa	28.4 C deg	28.4 %	1012 hPa	0 C deg
1744802421	981.6 hPa	29 C deg	28.2 %	1012.2 hPa	0 C deg
1744800621	981.8 hPa	29.1 C deg	28.3 %	1012.3 hPa	0 C deg
1744798821	982.1 hPa	29.2 C deg	28.3 %	1012.6 hPa	0 C deg
1744797021	982.4 hPa	29.4 C deg	28.2 %	1012.9 hPa	0 C deg
1744795221	982.6 hPa	28.9 C deg	28.6 %	1013.2 hPa	0 C deg
1744793421	982.5 hPa	28.9 C deg	28.7 %	1013 hPa	0 C deg
1744791621	982.3 hPa	29 C deg	28.6 %	1012.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)