This is the latest recevied telemetry packets stored in our database for station/object VK5RAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Battery* | TX* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745139987 | 19.5 Deg.C | 13.6 Volts | 31 PTT's | 8 | 31 |
| 1745138187 | 19.5 Deg.C | 13.6 Volts | 40 PTT's | 8 | 1 |
| 1745136386 | 19.5 Deg.C | 13.6 Volts | 22 PTT's | 7 | 31 |
| 1745134587 | 20 Deg.C | 13.6 Volts | 27 PTT's | 7 | 1 |
| 1745132789 | 20 Deg.C | 13.6 Volts | 24 PTT's | 6 | 31 |
| 1745130987 | 21 Deg.C | 13.6 Volts | 28 PTT's | 6 | 1 |
| 1745129187 | 22 Deg.C | 13.6 Volts | 24 PTT's | 5 | 31 |
| 1745127388 | 22.5 Deg.C | 13.6 Volts | 30 PTT's | 5 | 1 |
| 1745125588 | 24 Deg.C | 13.6 Volts | 26 PTT's | 4 | 31 |
| 1745123787 | 24 Deg.C | 13.6 Volts | 29 PTT's | 4 | 1 |
| 1745121987 | 24 Deg.C | 13.6 Volts | 27 PTT's | 3 | 31 |
| 1745120187 | 23.5 Deg.C | 13.5 Volts | 30 PTT's | 3 | 1 |
| 1745118387 | 23 Deg.C | 13.6 Volts | 23 PTT's | 2 | 31 |
| 1745116589 | 22 Deg.C | 13.6 Volts | 29 PTT's | 2 | 1 |
| 1745114787 | 21.5 Deg.C | 13.6 Volts | 28 PTT's | 1 | 31 |
| 1745112990 | 21.5 Deg.C | 13.6 Volts | 27 PTT's | 1 | 1 |
*Used Equation Coefficients:
Temp: 0, 0.5, 0
Battery: 0, 0.1, 0
TX: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)