This is the latest recevied telemetry packets stored in our database for station/object DB0REI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | A2* | A3* | A4* | A5* |
|---|---|---|---|---|---|
| 1753687538 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753686635 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753685736 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753684834 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753683935 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753683034 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753682135 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753681235 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753680334 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753679434 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753678534 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753677634 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753676734 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753675837 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753674934 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753674035 | 12.15 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753673136 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753672234 | 12.15 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753671334 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753670434 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753669535 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753668710 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753668635 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753667737 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
| 1753666834 | 12.3 Volt | 0 None | 0 None | 0 None | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
A2: 0, 0, 0
A3: 0, 0, 0
A4: 0, 0, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)