This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1786785509 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786785407 | 3.3 V | 0 V | 0 mW | 23.2 degC | 500 Pa |
| 1786785327 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786783710 | 3.3 V | 0 V | 0 mW | 23.3 degC | 500 Pa |
| 1786783529 | 3.3 V | 0 V | 0 mW | 23.3 degC | 500 Pa |
| 1786781909 | 3.3 V | 0 V | 0 mW | 23.2 degC | 500 Pa |
| 1786781807 | 3.3 V | 0 V | 0 mW | 23.3 degC | 500 Pa |
| 1786781725 | 3.3 V | 0 V | 0 mW | 23.2 degC | 500 Pa |
| 1786780107 | 3.3 V | 0 V | 0 mW | 23 degC | 500 Pa |
| 1786779925 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786778309 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786778206 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786778127 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786776507 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786776327 | 3.3 V | 0 V | 0 mW | 23 degC | 500 Pa |
| 1786774707 | 3.3 V | 0 V | 0 mW | 22.9 degC | 500 Pa |
| 1786774606 | 3.3 V | 0 V | 0 mW | 22.8 degC | 500 Pa |
| 1786774526 | 3.3 V | 0 V | 0 mW | 22.9 degC | 500 Pa |
| 1786772908 | 3.3 V | 0 V | 0 mW | 22.9 degC | 500 Pa |
| 1786771108 | 3.3 V | 0 V | 0 mW | 22.7 degC | 500 Pa |
| 1786771007 | 3.3 V | 0 V | 0 mW | 22.8 degC | 500 Pa |
| 1786770117 | 3.3 V | 0 V | 0 mW | 22.3 degC | 500 Pa |
| 1786769881 | 3.3 V | 0 V | 0 mW | 22.3 degC | 500 Pa |
| 1786768262 | 3.3 V | 0 V | 0 mW | 22.5 degC | 500 Pa |
| 1786768159 | 3.3 V | 0 V | 0 mW | 22.4 degC | 500 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)