This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790679786 | 368 Count | 886 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790677985 | 367 Count | 883 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790676184 | 366 Count | 881 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790674384 | 365 Count | 879 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790672583 | 362 Count | 876 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790670782 | 361 Count | 873 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790668981 | 360 Count | 871 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790667180 | 359 Count | 869 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790665379 | 358 Count | 867 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790663578 | 357 Count | 864 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790661778 | 356 Count | 861 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790659977 | 355 Count | 858 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790658187 | 354 Count | 843 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790656386 | 353 Count | 839 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790654585 | 352 Count | 834 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790652784 | 351 Count | 829 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790650983 | 350 Count | 825 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790649183 | 349 Count | 820 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790647382 | 348 Count | 815 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790645581 | 347 Count | 810 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790643780 | 346 Count | 805 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790641979 | 345 Count | 800 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1790640179 | 344 Count | 795 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790638378 | 343 Count | 789 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790636585 | 342 Count | 784 Count | 0 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)