APRS Track Direct

My position About ☰

reset

SP8KZI-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Ext*
1786729301	153 Count	287 Count	70 Count	0.08 VDC
1786728398	151 Count	284 Count	69 Count	0.08 VDC
1786727495	149 Count	281 Count	68 Count	0.08 VDC
1786725696	145 Count	275 Count	66 Count	0.08 VDC
1786722980	139 Count	267 Count	63 Count	0.08 VDC
1786722078	136 Count	262 Count	61 Count	0.08 VDC
1786720272	133 Count	259 Count	60 Count	0.08 VDC
1786717563	128 Count	252 Count	58 Count	0.08 VDC
1786716660	126 Count	249 Count	57 Count	0.08 VDC
1786715757	124 Count	246 Count	56 Count	0.08 VDC
1786714854	122 Count	243 Count	55 Count	0.08 VDC
1786713048	118 Count	237 Count	53 Count	0.08 VDC
1786712145	116 Count	225 Count	52 Count	0.08 VDC
1786706801	97 Count	164 Count	43 Count	0.08 VDC
1786704991	94 Count	160 Count	42 Count	0.08 VDC
1786703189	91 Count	156 Count	41 Count	0.08 VDC
1786701379	88 Count	152 Count	40 Count	0.08 VDC
1786700476	86 Count	148 Count	39 Count	0.08 VDC
1786699582	84 Count	145 Count	38 Count	0.08 VDC
1786698670	82 Count	143 Count	37 Count	0.08 VDC
1786697767	80 Count	140 Count	36 Count	0.08 VDC
1786696872	78 Count	138 Count	35 Count	0.08 VDC
1786695058	74 Count	130 Count	33 Count	0.08 VDC
1786694155	72 Count	128 Count	32 Count	0.08 VDC
1786693252	70 Count	125 Count	31 Count	0.08 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)