APRS Track Direct

My position About ☰

reset

BM3FFG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM3FFG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1790643262	34 cnt	0 cnt	26 cnt	0 cnt	8 cnt
1790642661	37 cnt	0 cnt	27 cnt	0 cnt	10 cnt
1790642061	45 cnt	0 cnt	29 cnt	0 cnt	16 cnt
1790641461	45 cnt	1 cnt	31 cnt	0 cnt	14 cnt
1790640861	50 cnt	1 cnt	37 cnt	0 cnt	13 cnt
1790640261	33 cnt	2 cnt	24 cnt	0 cnt	9 cnt
1790639661	32 cnt	3 cnt	30 cnt	0 cnt	2 cnt
1790639061	38 cnt	1 cnt	25 cnt	0 cnt	13 cnt
1790638461	44 cnt	0 cnt	29 cnt	0 cnt	15 cnt
1790637861	30 cnt	0 cnt	22 cnt	0 cnt	8 cnt
1790637260	40 cnt	0 cnt	32 cnt	0 cnt	8 cnt
1790636660	43 cnt	0 cnt	32 cnt	0 cnt	11 cnt
1790636060	27 cnt	0 cnt	23 cnt	0 cnt	4 cnt
1790635460	30 cnt	0 cnt	24 cnt	0 cnt	6 cnt
1790634860	38 cnt	0 cnt	26 cnt	1 cnt	11 cnt
1790634260	59 cnt	0 cnt	43 cnt	1 cnt	15 cnt
1790633660	42 cnt	0 cnt	31 cnt	0 cnt	11 cnt
1790633060	52 cnt	0 cnt	33 cnt	1 cnt	18 cnt
1790632460	46 cnt	0 cnt	33 cnt	0 cnt	13 cnt
1790631860	50 cnt	0 cnt	38 cnt	0 cnt	12 cnt
1790631260	43 cnt	0 cnt	33 cnt	1 cnt	9 cnt
1790630660	56 cnt	0 cnt	38 cnt	0 cnt	18 cnt
1790630060	48 cnt	0 cnt	35 cnt	0 cnt	13 cnt
1790629460	55 cnt	0 cnt	36 cnt	1 cnt	18 cnt
1790628860	49 cnt	0 cnt	38 cnt	1 cnt	10 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)