This is the latest recevied telemetry packets stored in our database for station/object OK0BR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786729941 | 6 | 0 | 112 | 11 | 57.22 |
| 1786729940 | 6 | 0 | 112 | 11 | 57.22 |
| 1786729040 | 4 | 0 | 112 | 10 | 57.22 |
| 1786729040 | 4 | 0 | 112 | 10 | 57.22 |
| 1786728139 | 5 | 0 | 112 | 9 | 58.89 |
| 1786727237 | 7 | 0 | 0 | 8 | 57.22 |
| 1786726336 | 3 | 0 | 112 | 7 | 57.78 |
| 1786725436 | - | - | - | - | - |
| 1786725435 | 4 | 0 | 112 | 6 | 57.22 |
| 1786724535 | 6 | 0 | 112 | 5 | 57.78 |
| 1786724534 | 6 | 0 | 112 | 5 | 57.78 |
| 1786723634 | 6 | 0 | 112 | 4 | 57.78 |
| 1786723633 | 6 | 0 | 112 | 4 | 57.78 |
| 1786722733 | - | - | - | - | - |
| 1786722732 | 4 | 0 | 112 | 3 | 58.33 |
| 1786721832 | 7 | 0 | 79 | 2 | 57.78 |
| 1786721832 | 7 | 0 | 79 | 2 | 57.78 |
| 1786720931 | 7 | 0 | 112 | 1 | 57.78 |
| 1786720930 | 7 | 0 | 112 | 1 | 57.78 |
| 1786720029 | 8 | 0 | 112 | 0 | 57.78 |
| 1786719129 | 4 | 0 | 112 | 95 | 57.78 |
| 1786719128 | 4 | 0 | 112 | 95 | 57.78 |
| 1786718227 | 11 | 0 | 112 | 94 | 56.67 |
| 1786717327 | 15 | 0 | 79 | 93 | 57.22 |
| 1786716426 | 17 | 0 | 79 | 92 | 56.67 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)