APRS Track Direct

My position About ☰

reset

VU2LCI-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU2LCI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1758223932	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758223212	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1758222492	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758221772	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758221052	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758220332	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758219612	0 Pkt	0 Pkt	0 Pkt	38 dB	0 bps
1758218892	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758218172	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758217452	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758216732	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758216012	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758215292	0 Pkt	0 Pkt	0 Pkt	38 dB	0 bps
1758214572	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758213852	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758213132	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758212412	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758211692	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758211554	0 Pkt	0 Pkt	0 Pkt	32 dB	0 bps
1758210253	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1758209533	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758208812	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758208092	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1758207372	0 Pkt	0 Pkt	0 Pkt	38 dB	0 bps
1758206652	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)