APRS Track Direct

My position About ☰

reset

IR2DF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1836274662	9 Pkt	100 Pkt	0 Pkt	11.18 Pcnt	32 Pcnt
1836274511	20 Pkt	100 Pkt	7 Pkt	11.2 Pcnt	32 Pcnt
1836274361	23 Pkt	110 Pkt	6 Pkt	11.18 Pcnt	33 Pcnt
1836274211	19 Pkt	100 Pkt	7 Pkt	11.2 Pcnt	33 Pcnt
1836274062	23 Pkt	110 Pkt	7 Pkt	11.19 Pcnt	33 Pcnt
1774091966	32 Pkt	180 Pkt	3 Pkt	0.04 Pcnt	66 Pcnt
1774091666	33 Pkt	170 Pkt	8 Pkt	0.04 Pcnt	66 Pcnt
1774091366	27 Pkt	170 Pkt	8 Pkt	0.04 Pcnt	67 Pcnt
1774091066	26 Pkt	170 Pkt	3 Pkt	0.04 Pcnt	68 Pcnt
1774090766	34 Pkt	180 Pkt	6 Pkt	0.03 Pcnt	69 Pcnt
1774090466	27 Pkt	170 Pkt	5 Pkt	0.03 Pcnt	70 Pcnt
1774090166	28 Pkt	170 Pkt	2 Pkt	0.03 Pcnt	71 Pcnt
1774089866	29 Pkt	170 Pkt	7 Pkt	0.03 Pcnt	71 Pcnt
1774089566	24 Pkt	170 Pkt	7 Pkt	0.03 Pcnt	71 Pcnt
1774089266	22 Pkt	180 Pkt	3 Pkt	0.03 Pcnt	72 Pcnt
1774088966	33 Pkt	180 Pkt	7 Pkt	0.02 Pcnt	73 Pcnt
1774088666	29 Pkt	180 Pkt	7 Pkt	0.02 Pcnt	75 Pcnt
1774088367	21 Pkt	170 Pkt	3 Pkt	0.02 Pcnt	76 Pcnt
1774088067	28 Pkt	180 Pkt	7 Pkt	0.02 Pcnt	76 Pcnt
1774087766	34 Pkt	180 Pkt	7 Pkt	0.02 Pcnt	77 Pcnt
1774087466	27 Pkt	170 Pkt	3 Pkt	0.02 Pcnt	75 Pcnt
1774087167	27 Pkt	170 Pkt	5 Pkt	0.01 Pcnt	76 Pcnt
1774086867	29 Pkt	180 Pkt	4 Pkt	0.01 Pcnt	77 Pcnt
1774086567	31 Pkt	170 Pkt	2 Pkt	0.01 Pcnt	76 Pcnt
1774086267	36 Pkt	170 Pkt	7 Pkt	0.01 Pcnt	75 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)