APRS Track Direct

My position About ☰

reset

IU4DKT-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1836274713	76 Pkt	570 Pkt	0.26 Pcnt	52 Pcnt
1836274563	74 Pkt	550 Pkt	0.26 Pcnt	52 Pcnt
1836274413	83 Pkt	570 Pkt	0.26 Pcnt	53 Pcnt
1836274263	79 Pkt	570 Pkt	0.26 Pcnt	53 Pcnt
1836274114	85 Pkt	560 Pkt	0.26 Pcnt	53 Pcnt
1782514309	66 Pkt	430 Pkt	0.18 Pcnt	63 Pcnt
1782514009	67 Pkt	430 Pkt	0.18 Pcnt	64 Pcnt
1782513709	67 Pkt	440 Pkt	0.18 Pcnt	66 Pcnt
1782513409	72 Pkt	440 Pkt	0.18 Pcnt	66 Pcnt
1782513109	69 Pkt	450 Pkt	0.18 Pcnt	68 Pcnt
1782512809	52 Pkt	450 Pkt	0.18 Pcnt	69 Pcnt
1782512509	41 Pkt	460 Pkt	0.18 Pcnt	72 Pcnt
1782512209	54 Pkt	490 Pkt	0.18 Pcnt	74 Pcnt
1782511909	70 Pkt	510 Pkt	0.18 Pcnt	76 Pcnt
1782511609	68 Pkt	520 Pkt	0.18 Pcnt	77 Pcnt
1782511309	79 Pkt	530 Pkt	0.18 Pcnt	76 Pcnt
1782511009	82 Pkt	540 Pkt	0.18 Pcnt	76 Pcnt
1782510709	72 Pkt	530 Pkt	0.18 Pcnt	76 Pcnt
1782510409	78 Pkt	540 Pkt	0.18 Pcnt	76 Pcnt
1782510109	80 Pkt	550 Pkt	0.18 Pcnt	75 Pcnt
1782509809	79 Pkt	550 Pkt	0.18 Pcnt	75 Pcnt
1782509509	81 Pkt	560 Pkt	0.18 Pcnt	74 Pcnt
1782509209	87 Pkt	580 Pkt	0.18 Pcnt	74 Pcnt
1782508909	82 Pkt	580 Pkt	0.18 Pcnt	73 Pcnt
1782508609	84 Pkt	590 Pkt	0.18 Pcnt	73 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)