This is the latest recevied telemetry packets stored in our database for station/object EA1HEH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | LX* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744284885 | -80 dbm | 0.37 % | 0 | 0 | 0 |
| 1744284285 | -80 dbm | 0.35 % | 0 | 0 | 0 |
| 1744283685 | -79 dbm | 0.32 % | 0 | 0 | 0 |
| 1744283085 | -80 dbm | 0.3 % | 0 | 0 | 0 |
| 1744282485 | -80 dbm | 0.28 % | 0 | 0 | 0 |
| 1744281885 | -80 dbm | 0.24 % | 0 | 0 | 0 |
| 1744281295 | -80 dbm | 0.22 % | 0 | 0 | 0 |
| 1744280685 | -81 dbm | 0.2 % | 0 | 0 | 0 |
| 1744280085 | -79 dbm | 0.2 % | 0 | 0 | 0 |
| 1744279485 | -80 dbm | 0.2 % | 0 | 0 | 0 |
| 1744278890 | -80 dbm | 0.2 % | 0 | 0 | 0 |
| 1744278285 | -80 dbm | 0.2 % | 0 | 0 | 0 |
| 1744277685 | -79 dbm | 0.18 % | 0 | 0 | 0 |
| 1744277085 | -79 dbm | 0.18 % | 0 | 0 | 0 |
| 1744276485 | -80 dbm | 0.16 % | 0 | 0 | 0 |
| 1744275885 | -80 dbm | 0.16 % | 0 | 0 | 0 |
| 1744275290 | -75 dbm | 0.18 % | 0 | 0 | 0 |
| 1744274685 | -75 dbm | 0.16 % | 0 | 0 | 0 |
| 1744274085 | -74 dbm | 0.16 % | 0 | 0 | 0 |
| 1744273485 | -74 dbm | 0.16 % | 0 | 0 | 0 |
| 1744272885 | -75 dbm | 0.14 % | 0 | 0 | 0 |
| 1744272285 | -74 dbm | 0.14 % | 0 | 0 | 0 |
| 1744271685 | -79 dbm | 0.14 % | 0 | 0 | 0 |
| 1744271085 | -80 dbm | 0.14 % | 0 | 0 | 0 |
| 1744270485 | -81 dbm | 0.12 % | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
LX: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)