This is the latest recevied telemetry packets stored in our database for station/object M0BPQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | Dg1h* | Eff1h* | A4* | A5* |
---|---|---|---|---|---|
1719420911 | 10 Pkt | 0 Pkt | 57 Pcnt | 0 None | 0 None |
1719420611 | 10 Pkt | 0 Pkt | 58 Pcnt | 0 None | 0 None |
1719420310 | 10 Pkt | 0 Pkt | 60 Pcnt | 0 None | 0 None |
1719420010 | 10 Pkt | 0 Pkt | 64 Pcnt | 0 None | 0 None |
1719419710 | 10 Pkt | 0 Pkt | 68 Pcnt | 0 None | 0 None |
1719419410 | 10 Pkt | 0 Pkt | 69 Pcnt | 0 None | 0 None |
1719419109 | 20 Pkt | 0 Pkt | 71 Pcnt | 0 None | 0 None |
1719418809 | 20 Pkt | 0 Pkt | 72 Pcnt | 0 None | 0 None |
1719418509 | 20 Pkt | 0 Pkt | 74 Pcnt | 0 None | 0 None |
1719418208 | 20 Pkt | 0 Pkt | 75 Pcnt | 0 None | 0 None |
1719417908 | 20 Pkt | 0 Pkt | 75 Pcnt | 0 None | 0 None |
1719417608 | 20 Pkt | 0 Pkt | 72 Pcnt | 0 None | 0 None |
1719417307 | 20 Pkt | 0 Pkt | 71 Pcnt | 0 None | 0 None |
1719417007 | 10 Pkt | 0 Pkt | 72 Pcnt | 0 None | 0 None |
1719416707 | 10 Pkt | 0 Pkt | 66 Pcnt | 0 None | 0 None |
1719416406 | 10 Pkt | 0 Pkt | 72 Pcnt | 0 None | 0 None |
1719416106 | 10 Pkt | 0 Pkt | 73 Pcnt | 0 None | 0 None |
1719415806 | 10 Pkt | 0 Pkt | 73 Pcnt | 0 None | 0 None |
1719415506 | 0 Pkt | 0 Pkt | 66 Pcnt | 0 None | 0 None |
1719415205 | 0 Pkt | 0 Pkt | 60 Pcnt | 0 None | 0 None |
1719414905 | 0 Pkt | 0 Pkt | 60 Pcnt | 0 None | 0 None |
1719414605 | 0 Pkt | 0 Pkt | 57 Pcnt | 0 None | 0 None |
1719414304 | 0 Pkt | 0 Pkt | 40 Pcnt | 0 None | 0 None |
1719414004 | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None | 0 None |
1719413704 | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None | 0 None |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A4: 0, 0, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)