This is the latest recevied telemetry packets stored in our database for station/object BEAMONE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719848650 | 19.9 deg C | 62.4 % | 0 | 0 | 0 |
1719847750 | 20.2 deg C | 60.3 % | 0 | 0 | 0 |
1719846850 | 20.2 deg C | 62.2 % | 0 | 0 | 0 |
1719845950 | 19.8 deg C | 62.3 % | 0 | 0 | 0 |
1719845050 | 20.5 deg C | 59.6 % | 0 | 0 | 0 |
1719844150 | 20.1 deg C | 62.5 % | 0 | 0 | 0 |
1719843250 | 19.6 deg C | 67 % | 0 | 0 | 0 |
1719842350 | 18.9 deg C | 67.5 % | 0 | 0 | 0 |
1719841450 | 19.8 deg C | 64.2 % | 0 | 0 | 0 |
1719841359 | 19.6 deg C | 64.5 % | 0 | 0 | 0 |
1719840459 | 19.5 deg C | 65.6 % | 0 | 0 | 0 |
1719839559 | 19.6 deg C | 72.1 % | 0 | 0 | 0 |
1719838658 | 20.2 deg C | 62.3 % | 0 | 0 | 0 |
1719837758 | 20.1 deg C | 65.3 % | 0 | 0 | 0 |
1719836858 | 20.9 deg C | 63.1 % | 0 | 0 | 0 |
1719835958 | 20.7 deg C | 62.6 % | 0 | 0 | 0 |
1719835058 | 20 deg C | 66.3 % | 0 | 0 | 0 |
1719834158 | 19.9 deg C | 71.5 % | 0 | 0 | 0 |
1719833258 | 20 deg C | 71 % | 0 | 0 | 0 |
1719832358 | 19.3 deg C | 71.6 % | 0 | 0 | 0 |
1719831458 | 20.1 deg C | 62.3 % | 0 | 0 | 0 |
1719830558 | 22.2 deg C | 53.6 % | 0 | 0 | 0 |
1719829658 | 20.7 deg C | 59 % | 0 | 0 | 0 |
1719828758 | 21.3 deg C | 56.9 % | 0 | 0 | 0 |
1719827857 | 20.6 deg C | 60.6 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)