This is the latest recevied telemetry packets stored in our database for station/object F1ZOC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | U Alim* | I Alim* | Temp* | RX'ed* | Decod* |
---|---|---|---|---|---|
1719655342 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719655042 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719654742 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719654441 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719654141 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719653841 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719653540 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719653240 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719652940 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719652640 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719652339 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719652039 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719651739 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719651439 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719651139 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719650838 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719650538 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719650238 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719649939 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719649637 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719649337 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719649037 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719648737 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719648436 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719648136 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
*Used Equation Coefficients:
U Alim: 0, 0.1, 0
I Alim: 0, 19.5, 0
Temp: 0, 0.5, -64
RX'ed: 0, 1, 0
Decod: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)