This is the latest recevied telemetry packets stored in our database for station/object F1ZOC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | U Alim* | I Alim* | Temp* | RX'ed* | Decod* |
---|---|---|---|---|---|
1719667052 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719666752 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719666452 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719666151 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719665851 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719665551 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719665251 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719664950 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719664650 | 0 Volt | 0 mA | 23.5 °C | 0 | 100 % |
1719664350 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719664050 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719663749 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719663449 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719663151 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719662849 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719662548 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719662248 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719661948 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719661647 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719661347 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719661047 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719660747 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719660446 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719660146 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
1719659846 | 0 Volt | 0 mA | 23 °C | 0 | 100 % |
*Used Equation Coefficients:
U Alim: 0, 0.1, 0
I Alim: 0, 19.5, 0
Temp: 0, 0.5, -64
RX'ed: 0, 1, 0
Decod: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)