This is the latest recevied telemetry packets stored in our database for station/object YO8SBY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | PM1.0* | PM2.5* | PM10* | RSSI* | SUN* |
---|---|---|---|---|---|
1719663403 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -67 dBm | 48 % |
1719661579 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -70 dBm | 51 % |
1719659759 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -70 dBm | 52 % |
1719657931 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -69 dBm | 53 % |
1719656107 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -70 dBm | 54 % |
1719654283 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -69 dBm | 53 % |
1719652459 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -69 dBm | 50 % |
1719650635 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -68 dBm | 48 % |
1719648811 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -68 dBm | 46 % |
1719646987 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -68 dBm | 44 % |
1719645163 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -66 dBm | 43 % |
1719643341 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -68 dBm | 42 % |
1719641515 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -68 dBm | 37 % |
1719639649 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -65 dBm | 37 % |
1719637825 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -69 dBm | 34 % |
1719636001 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -66 dBm | 32 % |
1719634177 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -65 dBm | 30 % |
1719632353 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -67 dBm | 18 % |
1719630529 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -65 dBm | 14 % |
1719628705 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -65 dBm | 7 % |
1719626882 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -70 dBm | 1 % |
1719625058 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -69 dBm | 0 % |
*Used Equation Coefficients:
PM1.0: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)