This is the latest recevied telemetry packets stored in our database for station/object SPRFLD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | Rx10m* | Dig1h* | Temp* | Vin* |
---|---|---|---|---|---|
1719394028 | 570 Pkt | 90 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719393729 | 580 Pkt | 79 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719393728 | 580 Pkt | 79 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719393428 | 570 Pkt | 98 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719393128 | 560 Pkt | 89 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719392828 | 560 Pkt | 90 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719392528 | 530 Pkt | 91 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719392228 | 530 Pkt | 86 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719391929 | 520 Pkt | 81 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719391928 | 520 Pkt | 81 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719391628 | 520 Pkt | 105 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719391328 | 520 Pkt | 90 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719391028 | 510 Pkt | 75 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719390728 | 510 Pkt | 94 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719390428 | 510 Pkt | 86 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719390129 | 500 Pkt | 68 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719390128 | 500 Pkt | 68 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719389828 | 500 Pkt | 84 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719389528 | 510 Pkt | 67 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719389228 | 520 Pkt | 68 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719388928 | 520 Pkt | 79 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719388628 | 520 Pkt | 70 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719388329 | 530 Pkt | 82 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719388328 | 530 Pkt | 82 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719388028 | 520 Pkt | 98 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Dig1h: 0, 10, 0
Temp: 0, 0.9, -83
Vin: 0, 0.075, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)