This is the latest recevied telemetry packets stored in our database for station/object SPRFLD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx1h* | Rx10m* | Dig1h* | Temp* | Vin* |
---|---|---|---|---|---|
1719634324 | 490 Pkt | 103 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719634024 | 470 Pkt | 87 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719633724 | 450 Pkt | 74 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719633424 | 440 Pkt | 70 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719633125 | 430 Pkt | 75 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719633124 | 430 Pkt | 75 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719632824 | 430 Pkt | 80 Pkt | 0 Pck | 76.3 F | 14.4 Volt |
1719632524 | 440 Pkt | 60 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719632224 | 460 Pkt | 59 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719631924 | 470 Pkt | 71 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719631624 | 470 Pkt | 60 Pkt | 0 Pck | 77.2 F | 14.4 Volt |
1719631325 | 480 Pkt | 65 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719631324 | 480 Pkt | 65 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719631024 | 480 Pkt | 72 Pkt | 0 Pck | 78.1 F | 14.4 Volt |
1719630724 | 490 Pkt | 69 Pkt | 0 Pck | 79 F | 14.4 Volt |
1719630424 | 470 Pkt | 61 Pkt | 0 Pck | 79.9 F | 14.4 Volt |
1719630124 | 470 Pkt | 57 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719629824 | 490 Pkt | 58 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719629525 | 510 Pkt | 87 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719629524 | 510 Pkt | 87 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719629224 | 510 Pkt | 103 Pkt | 0 Pck | 81.7 F | 14.4 Volt |
1719628924 | 500 Pkt | 88 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719628624 | 490 Pkt | 74 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719628324 | 490 Pkt | 76 Pkt | 0 Pck | 80.8 F | 14.4 Volt |
1719628024 | 500 Pkt | 69 Pkt | 0 Pck | 79.9 F | 14.4 Volt |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Dig1h: 0, 10, 0
Temp: 0, 0.9, -83
Vin: 0, 0.075, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)