This is the latest recevied telemetry packets stored in our database for station/object DC1MPP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719640854 | 25.5 deg C | 62.2 % | 1014.9 hPa | 0 | 0 |
1719640021 | 25.4 deg C | 62.5 % | 1015 hPa | 0 | 0 |
1719639126 | 25.3 deg C | 63 % | 1015.1 hPa | 0 | 0 |
1719638229 | 25.1 deg C | 62.5 % | 1015.3 hPa | 0 | 0 |
1719637330 | 25 deg C | 62.5 % | 1015.3 hPa | 0 | 0 |
1719636427 | 24.9 deg C | 62.7 % | 1015.5 hPa | 0 | 0 |
1719635522 | 24.9 deg C | 62.8 % | 1015.3 hPa | 0 | 0 |
1719634623 | 24.8 deg C | 62.9 % | 1015.2 hPa | 0 | 0 |
1719633720 | 24.9 deg C | 62.9 % | 1015.4 hPa | 0 | 0 |
1719632819 | 24.9 deg C | 63 % | 1015.6 hPa | 0 | 0 |
1719631921 | 24.9 deg C | 63 % | 1015.8 hPa | 0 | 0 |
1719631019 | 24.9 deg C | 63 % | 1015.7 hPa | 0 | 0 |
1719630123 | 24.9 deg C | 63.1 % | 1015.6 hPa | 0 | 0 |
1719629222 | 24.9 deg C | 63.1 % | 1015.6 hPa | 0 | 0 |
1719628324 | 25 deg C | 63.1 % | 1015.6 hPa | 0 | 0 |
1719627429 | 25 deg C | 63.1 % | 1015.6 hPa | 0 | 0 |
1719626526 | 25 deg C | 63.1 % | 1015.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)