This is the latest recevied telemetry packets stored in our database for station/object OE5HWN-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1719662973 | 983.4 hPa | 33.4 C deg | 36 % | 1014.1 hPa | 0 C deg |
1719661176 | 983.8 hPa | 33.2 C deg | 36.6 % | 1014.5 hPa | 0 C deg |
1719659373 | 984.2 hPa | 33.3 C deg | 36.7 % | 1014.9 hPa | 0 C deg |
1719657583 | 984.7 hPa | 32.4 C deg | 37.1 % | 1015.5 hPa | 0 C deg |
1719655773 | 985 hPa | 31.6 C deg | 38.8 % | 1015.9 hPa | 0 C deg |
1719652175 | 985.8 hPa | 31.3 C deg | 43.6 % | 1016.8 hPa | 0 C deg |
1719648573 | 986.4 hPa | 29 C deg | 49.8 % | 1017.6 hPa | 0 C deg |
1719646778 | 986.7 hPa | 28.5 C deg | 50.7 % | 1018 hPa | 0 C deg |
1719644972 | 986.8 hPa | 27.5 C deg | 54 % | 1018.2 hPa | 0 C deg |
1719643179 | 987.3 hPa | 26 C deg | 56.5 % | 1018.9 hPa | 0 C deg |
1719641372 | 987.3 hPa | 25.7 C deg | 57.1 % | 1018.9 hPa | 0 C deg |
1719639578 | 987.4 hPa | 25.1 C deg | 58.2 % | 1019.1 hPa | 0 C deg |
1719637772 | 987.3 hPa | 24.3 C deg | 61.6 % | 1019.1 hPa | 0 C deg |
1719635978 | 987.5 hPa | 23.1 C deg | 66 % | 1019.4 hPa | 0 C deg |
1719634172 | 987.4 hPa | 23.5 C deg | 65.4 % | 1019.3 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)