This is the latest recevied telemetry packets stored in our database for station/object IZ2URO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | RSSI* | Uptime* | Value4* | Value5* |
---|---|---|---|---|---|
1719805062 | 19.23 Volt | -63 dBm | 0 Hours | 0 | 0 |
1719804394 | 19.23 Volt | -65 dBm | 0.5 Hours | 0 | 0 |
1719804039 | 19.23 Volt | -65 dBm | 0.4 Hours | 0 | 0 |
1719803684 | 18.75 Volt | -65 dBm | 0.3 Hours | 0 | 0 |
1719803328 | 19.23 Volt | -63 dBm | 0.2 Hours | 0 | 0 |
1719802970 | 19.23 Volt | -67 dBm | 0.1 Hours | 0 | 0 |
1719801949 | 19.28 Volt | -67 dBm | 1.6 Hours | 0 | 0 |
1719801594 | 19.02 Volt | -67 dBm | 1.5 Hours | 0 | 0 |
1719801236 | 18.96 Volt | -65 dBm | 1.4 Hours | 0 | 0 |
1719800881 | 19.23 Volt | -65 dBm | 1.3 Hours | 0 | 0 |
1719800526 | 19.18 Volt | -65 dBm | 1.2 Hours | 0 | 0 |
1719800172 | 18.91 Volt | -67 dBm | 1.1 Hours | 0 | 0 |
1719799812 | 19.28 Volt | -67 dBm | 1 Hours | 0 | 0 |
1719799453 | 19.28 Volt | -65 dBm | 0.9 Hours | 0 | 0 |
1719799099 | 18.86 Volt | -65 dBm | 0.8 Hours | 0 | 0 |
1719798739 | 19.12 Volt | -65 dBm | 0.7 Hours | 0 | 0 |
1719798385 | 19.28 Volt | -65 dBm | 0.6 Hours | 0 | 0 |
1719798029 | 19.28 Volt | -65 dBm | 0.5 Hours | 0 | 0 |
1719797674 | 19.28 Volt | -65 dBm | 0.4 Hours | 0 | 0 |
1719797316 | 19.28 Volt | -65 dBm | 0.3 Hours | 0 | 0 |
1719796961 | 19.28 Volt | -65 dBm | 0.2 Hours | 0 | 0 |
1719796606 | 19.28 Volt | -65 dBm | 0.1 Hours | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
RSSI: 0, -1, 0
Uptime: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)