This is the latest recevied telemetry packets stored in our database for station/object IZ2URO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | RSSI* | Uptime* | Value4* | Value5* |
---|---|---|---|---|---|
1719649749 | 20.72 Volt | -65 dBm | 1.8 Hours | 0 | 0 |
1719649391 | 21.36 Volt | -63 dBm | 1.7 Hours | 0 | 0 |
1719649033 | 20.77 Volt | -65 dBm | 1.6 Hours | 0 | 0 |
1719648676 | 21.25 Volt | -63 dBm | 1.5 Hours | 0 | 0 |
1719648321 | 21.25 Volt | -63 dBm | 1.4 Hours | 0 | 0 |
1719647965 | 21.04 Volt | -65 dBm | 1.3 Hours | 0 | 0 |
1719647611 | 21.41 Volt | -65 dBm | 1.2 Hours | 0 | 0 |
1719647253 | 21.57 Volt | -65 dBm | 1.1 Hours | 0 | 0 |
1719646894 | 21.47 Volt | -67 dBm | 1 Hours | 0 | 0 |
1719646540 | 21.09 Volt | -67 dBm | 0.9 Hours | 0 | 0 |
1719646182 | 21.2 Volt | -69 dBm | 0.8 Hours | 0 | 0 |
1719645824 | 20.61 Volt | -63 dBm | 0.7 Hours | 0 | 0 |
1719645469 | 21.15 Volt | -61 dBm | 0.6 Hours | 0 | 0 |
1719645115 | 21.57 Volt | -65 dBm | 0.5 Hours | 0 | 0 |
1719644760 | 21.04 Volt | -65 dBm | 0.4 Hours | 0 | 0 |
1719644402 | 21.31 Volt | -63 dBm | 0.3 Hours | 0 | 0 |
1719644044 | 21.09 Volt | -63 dBm | 0.2 Hours | 0 | 0 |
1719643686 | 21.04 Volt | -65 dBm | 0.1 Hours | 0 | 0 |
1719643331 | 21.09 Volt | -61 dBm | 0 Hours | 0 | 0 |
1719642663 | 21.2 Volt | -63 dBm | 3.1 Hours | 0 | 0 |
1719642308 | 20.88 Volt | -65 dBm | 3 Hours | 0 | 0 |
1719641954 | 20.72 Volt | -63 dBm | 2.9 Hours | 0 | 0 |
1719641596 | 20.61 Volt | -65 dBm | 2.8 Hours | 0 | 0 |
1719641238 | 20.45 Volt | -65 dBm | 2.7 Hours | 0 | 0 |
1719640866 | 19.82 Volt | -63 dBm | 2.6 Hours | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
RSSI: 0, -1, 0
Uptime: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)