This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RX 1h* | AKU +/-* | Akumul* | PV in* | Temp* |
---|---|---|---|---|---|
1719643928 | 1260 Paket | 10.16 A--48V | 54.33 Volt | 5.27 A--48V | 24.5 C |
1719643928 | 1260 Paket | 10.16 A--48V | 54.33 Volt | 5.27 A--48V | 24.5 C |
1719643627 | 1320 Paket | 9.96 A--48V | 53.86 Volt | 5.08 A--48V | 24.5 C |
1719643327 | 1360 Paket | 9.57 A--48V | 53.86 Volt | 4.88 A--48V | 24.5 C |
1719643027 | 1380 Paket | 9.37 A--48V | 53.86 Volt | 4.69 A--48V | 24.5 C |
1719642726 | 1370 Paket | 8.98 A--48V | 53.86 Volt | 4.69 A--48V | 24.5 C |
1719642426 | 1390 Paket | 8.59 A--48V | 53.39 Volt | 4.49 A--48V | 24.5 C |
1719642126 | 1370 Paket | 8.4 A--48V | 53.39 Volt | 4.3 A--48V | 24.5 C |
1719642126 | 1370 Paket | 8.4 A--48V | 53.39 Volt | 4.3 A--48V | 24.5 C |
1719641826 | 1380 Paket | 8.01 A--48V | 53.39 Volt | 4.3 A--48V | 24.5 C |
1719641525 | 1380 Paket | 7.62 A--48V | 53.39 Volt | 4.1 A--48V | 24.5 C |
1719641225 | 1420 Paket | 7.23 A--48V | 53.39 Volt | 3.91 A--48V | 24.5 C |
1719640925 | 1440 Paket | 6.84 A--48V | 52.92 Volt | 3.71 A--48V | 24.5 C |
1719640624 | 1430 Paket | 6.44 A--48V | 52.92 Volt | 3.52 A--48V | 24.5 C |
1719640325 | 1410 Paket | 6.05 A--48V | 52.92 Volt | 3.52 A--48V | 24.5 C |
1719640324 | 1410 Paket | 6.05 A--48V | 52.92 Volt | 3.52 A--48V | 24.5 C |
*Used Equation Coefficients:
RX 1h: 0, 10, 0
AKU +/-: 0, 0.1953, -24.8031
Akumul: 0, 0.4716, 0.1
PV in: 0, 0.1953, -24.8031
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)