This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10min* | Tx10min* | Digi10min* | srvrTimeout* | Uptime* |
---|---|---|---|---|---|
1719848692 | 24 Pkt | 4 Pkt | 0 Pkt | 8 Cnt | 0 Hours |
1719848092 | 14 Pkt | 1 Pkt | 0 Pkt | 4 Cnt | 0 Hours |
1719846455 | 12 Pkt | 1 Pkt | 0 Pkt | 20 Cnt | 0 Hours |
1719845855 | 23 Pkt | 1 Pkt | 0 Pkt | 16 Cnt | 0 Hours |
1719845255 | 24 Pkt | 1 Pkt | 0 Pkt | 12 Cnt | 0 Hours |
1719844655 | 15 Pkt | 4 Pkt | 0 Pkt | 8 Cnt | 0 Hours |
1719844055 | 14 Pkt | 1 Pkt | 0 Pkt | 4 Cnt | 0 Hours |
1719843017 | 11 Pkt | 2 Pkt | 1 Pkt | 24 Cnt | 1 Hours |
1719842417 | 22 Pkt | 3 Pkt | 2 Pkt | 20 Cnt | 0 Hours |
1719841817 | 20 Pkt | 1 Pkt | 0 Pkt | 16 Cnt | 0 Hours |
1719841217 | 14 Pkt | 1 Pkt | 0 Pkt | 12 Cnt | 0 Hours |
1719840618 | 17 Pkt | 4 Pkt | 0 Pkt | 8 Cnt | 0 Hours |
1719840017 | 25 Pkt | 1 Pkt | 0 Pkt | 4 Cnt | 0 Hours |
1719838979 | 13 Pkt | 1 Pkt | 0 Pkt | 24 Cnt | 1 Hours |
1719838379 | 22 Pkt | 1 Pkt | 0 Pkt | 20 Cnt | 0 Hours |
1719837779 | 20 Pkt | 1 Pkt | 0 Pkt | 16 Cnt | 0 Hours |
1719837179 | 17 Pkt | 1 Pkt | 0 Pkt | 12 Cnt | 0 Hours |
1719836579 | 21 Pkt | 5 Pkt | 1 Pkt | 8 Cnt | 0 Hours |
1719834942 | 19 Pkt | 1 Pkt | 0 Pkt | 24 Cnt | 1 Hours |
1719834342 | 58 Pkt | 2 Pkt | 1 Pkt | 20 Cnt | 0 Hours |
1719833742 | 37 Pkt | 10 Pkt | 9 Pkt | 16 Cnt | 0 Hours |
1719833142 | 33 Pkt | 15 Pkt | 14 Pkt | 12 Cnt | 0 Hours |
1719832542 | 47 Pkt | 18 Pkt | 14 Pkt | 8 Cnt | 0 Hours |
1719831941 | 17 Pkt | 4 Pkt | 3 Pkt | 4 Cnt | 0 Hours |
1719830904 | 19 Pkt | 1 Pkt | 0 Pkt | 24 Cnt | 1 Hours |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
srvrTimeout: 0, 1, 0
Uptime: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)